Full Spectrum Laser MUSE TITAM, Руководство по эксплуатации

Страница: 13 / 87

Assembly Stage 2: Connect the Exhaust System
It is required that an exhaust fan is connected and operating whenever you run a job on your laser. A properly
installed exhaust fan removes smoke and fumes from the case and exhausts them to the outside of the
building or a fume extractor.
1. Position Ducting: Place your 6” ducting over the Exhaust Port located at the back of the machine and
hold. Secure with 6” ducting clamp.
2. Attach Exhaust Fan: Secure the other end of the ducting, connected to the machine, to the exhaust
fan. Now repeat the ducting and clamping process on the other side of the exhaust fan(if applicable).
3. Attach Exhaust Fan: Set the open end outside of a window or an installed ventilation outlet. Check
your system for leaks - most can be remedied with duct tape. Please be aware that the protective
housing is not designed to be airtight; the front grill is designed to allow an exhaust system to draw
fresh air through the work area.
4. Connect to Power: Plug the exhaust fan power cord into the lower power plug marked “exhaust fan”
on the back of your Muse Titan. Note that accessories plugged into the back of your Muse Titan will
only turn on when the laser is fired (as intended to save power).
5. Fume Extractor Upgrade (optional): You can also upgrade to a fume extractor. Fume extractors are
air purifiers that clean the air through HEPA Filter. Fume extractors do not require outside ventilation.
This is a great choice for workshops that do not have the option to ventilate outside
Both the extractors and the filters are available on the Full Spectrum Laser website at:
http://fslaser.com/laser-accessories/
Ask a customer support representative which fume extractor is right for your needs.
13