Full Spectrum Laser MUSE TITAM, Руководство по эксплуатации

Страница: 5 / 87

Section I. Safety
Always inspect the laser cutter for damage or breakage before each
use. Do not operate machinery that is damaged or defective in any
way.
Always have a clean, level, and open work space to unbox and place
your laser cutter.
The laser tube is filled with CO2 gas. While carbon dioxide is a class
2.2 gas (nonflammable and nontoxic), the release of this gas from the
laser tube will render your laser inoperable.
Never modify, disassemble, or in any way alter the construction of the
laser and never start up a system that has been modified or
disassembled.
Never leave the laser system unattended during operation.
Keep your laser system clean. A buildup of cutting and engraving residue
and debris is dangerous and can create a fire hazard. Keep your laser
system clean and free of debris. Regularly remove the cutting grid to clean
any small pieces that have gotten stuck or fallen through.
Do not disassemble the machine or remove any of its protective
covers.
Always have on hand a first-aid kit designed for the initial treatment of
burns and smoke inhalation.
Be sure to store this kit in an area that is
outside risk areas.
Never operate the machine with any of the panels removed. Be aware
that removal of any portion of the cabinet will expose the laser system and
greatly increase the risk of injury and/or fire. Personal injury and fire risks
are especially pronounced if the machine is operated with the bottom panel
removed. Remember that the CO2 laser beam is invisible.
Never place hands or fingers into moving parts such as cooling fans.
The laser tube is made of glass and is therefore extremely fragile and can
cause severe lacerations if broken.
4
Setup Precautions
Follow all safety protocols and procedures before operating any machinery. It is the responsibility of the
operator to ensure all safety precautions are correctly followed, and the machine is properly assembled and in
working order.