background image

Appendix D. Warranty

Within the first 30 days, Full Spectrum Laser will replace or repair any defective parts free of charge and pay 
for ground shipping of parts. Overnight shipping is available at extra charge.

Outside the first 30 days, Full Spectrum Laser will replace or repair any defective part within the warranty 
period free of charge but shipping charges are the responsibility of the customer. The warranty includes parts 
and labor only. Shipping of defective and replacement components is excluded by the warranty. The customer 
may arrange their own shipping or drop parts off to exchange parts at our warehouse free of charge. Typically, 
Full Spectrum Laser has most replacement parts on hand for immediate shipment of under warranty parts.

All defective parts must be returned to Full Spectrum Laser postage paid for evaluation before replacements 
are issued unless otherwise authorized. The warranty is valid for normal use only and excludes Acts of God, 
user error and use outside of normal parameters. Parts damaged by fires are considered user error if the 
machine is left unattended. Just like operating a household gas stove, always stand next to the machine with a 
fire extinguisher and be ready to turn it off in case of a fire and never operate the machine unattended.

Prior to 8/7/2012, the extended warranty was charged separately and the Desktop Lasers had a 60-day 
base warranty on all items excluding shipping unless an extended warranty was purchased.

After 8/7/2012, the desktop lasers have a 60-day warranty on all items and a free extended limited 1- year 
warranty which excludes consumable items/shipping included in their price. The limited warranty excludes 
shipping and consumables and other normal wear and tear items. All electronic items (control cards, power 
supplies, motors) and most mechanical items are covered under the extended warranty unless damaged by 
abuse/fires. Consumables not covered include, but are not limited to, rubber parts such as tubing, belts, plastic 
wheels, lenses, mirrors, other optics, and laser tubes. Within the first 30 days the original purchaser may 
transfer the balance of your warranty to anyone else free of charge provided you notify us in writing. Outside of 
the first 30 days, we will only provide warranty and tech support services to the original purchaser unless a 
warranty transfer fee is paid as there is a cost involved with initial tech support of new users and accounting 
fees. If you sell your machine, the warranty remains valid but the buyer must arrange with the original 
purchaser to request RMAs and send in the machine for repairs unless a warranty transfer fee is paid.

Please Note: Full Spectrum Laser DOES NOT offer warranties or customer support for 3rd Party 
replacement parts, including replacement laser tubes. Use of such parts may not be compatible with 
Full Spectrum Laser machines and can cause damage to your laser system.

Visit 

https://laser101.fslaser.com/support

 for most current warranty postings.

84

Содержание MUSE TITAM
























































































Отзывы: