The ON / OFF key and the LED on the handpiece light up when starting up.
Ultrasonic Cutter
Operation Guide
700 Shimohinata, Kanuma, Tochigi 322-8666, Japan TEL: +81 289 64 3520 FAX: +81 289 62 1135
DOWN key
Reduce
the power level.
DOWN key
UP key
Increase
the power level.
UP key
ON / OFF key
Start and stop
the handpiece.
Main power switch
Power ON:
Press [Main power switch]
The LED on the control panel lights up.
Displays the power level.
(Can be adjusted during usage)
1
Power level adjustment:
Press [DOWN key] or [UP key]
2
Startup:
Press [ON / OFF key] or use the foot switch
3
When using the optional foot switch
• Factory default setting: Pressing the foot switch to start and releasing it to stop.
• The setting can be changed to pressing the foot switch to start and pressing it again to stop. See attached
operation manual to check how to change the setting.
If it is activated by a foot switch, it can only be stopped by a foot switch. See the other side for instructions on connecting.
PR-K359E Ver.1 2022-05-31 00.N
See attached operation manual
for details.
