manualshive.com logo in svg

Fujitsu PRIMEQUEST 440, Руководство по проектированию систем

Поделиться
Скачать
Fujitsu PRIMEQUEST 440 Скачать руководство пользователя страница 75

C122-B001-02EN

2-17

 

2.3 IO_Unit

Mounting conditions of SCSI cards and usable built-in I/Os

Figure 2.8

 shows an example that explains the priority ranks of IO_Units, mounting 

conditions of SCSI cards, and usable built-in IOs within the same partition.  In the 
partition shown in 

Figure 2.8

, eight IO_Units are allocated (the SB is omitted) and 

IOU #1 is specified as the home IO_Unit.  If a SCSI card is mounted in this partition, 
it needs to be mounted in IOU #1, which has a priority rank of 1, or in IOU #0, which 
has a priority rank of 2.  If a SCSI port on an IO_Unit in this partition is used, IOU #1, 
IOU #0, IOU #2, and IOU #3, which have priority ranks of 1, 2, 3, and 4, respectively, 
can be used.  If a built-in HDD is mounted in an IO_Unit in this partition, it needs to 
be mounted in IOU #1, IOU #0, IOU #2, or IOU #3, which have priority ranks of 1, 2, 
3, and 4, respectively.

Figure 2.8  Mounting conditions of SCSI cards and usable built-in I/Os 

(within the same partition)

Home IOU(IOU#1)

IOU #0

#0

#1

#2

#3

#0

#1

#2

#3

PCI_Box#0-7

PCIU#0

PCIU#1

PCIU#2

PCIU#3

#0 #1 #2

#0 #1 #2

#0 #1 #2

#0 #1 #2

IOU #2 IOU #3

IOU #4

IOU #5

IOU #6

IOU #7

SCSI cards can be mounted.

HDDs or external SCSI interfaces can be used.

HDDs, external SCSI interfaces, and SCSI cards 
can not be mounted or used.

Partition #N

Starting from the home IO_Unit, the IO_Units with the four smallest IO_Unit numbers can be 
used for mounting HDDs and using external SCSI interfaces.

Содержание PRIMEQUEST 440

























































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды