manualshive.com logo in svg

Fujitsu PRIMEQUEST 440, Руководство по проектированию систем

Поделиться
Скачать
Fujitsu PRIMEQUEST 440 Скачать руководство пользователя страница 120

4-14

C122-B001-02EN

CHAPTER 4 Hardware System Management

 

4.2.2

Hardware configuration display

This function displays the configuration and state of hardware.

This function displays the configuration of all components such as SBs and IO_Units 
including fans and power supply units mounted in the PRIMEQUEST system and 
units in the components such as CPUs, memory, and HDDs.

Figure 4.7  Example of the configuration display screen

Figure 4.7

 shows an example of displaying the configuration of the entire system.  

The states in which the configuration elements of the system are placed are also 
displayed in the configuration information.  For example, whether the configuration 
elements are in the normal or abnormal state is displayed.  In some cases where these 
elements are in the abnormal state, the system administrator or person in charge of 
maintenance needs take corrective action.  Detailed information can be displayed by 
tracing the link in the display item field.

Also, the configuration can be displayed in units of partitions.  Detailed information 
on the configuration and states of the SBs and IO_Units allocated to each partition are 
displayed in this case.

Navigation bar

Menu

Display of configuration of entire system

Fan, power supply, 

and temperature states

SB configuration 

and state

IO_Unit configuration 

and state
XAI and XDI configuration 

and states

Failure display

Warning display

Failure display

Warning display

Содержание PRIMEQUEST 440

























































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды