manualshive.com logo in svg

Fujitsu PRIMEQUEST 440, Руководство по проектированию систем

Поделиться
Скачать
Fujitsu PRIMEQUEST 440 Скачать руководство пользователя страница 205

C122-B001-02EN

7-7

 

7.1 Hot Swappable Components

(10) XDIs

A redundant configuration and hot swapping are available while System Mirror is 
enabled.  They are not available when System Mirror is not set.

When the operation is performed in System Mirror:

Two XDI systems form a redundant configuration.  If an XDI fails, the failed XDI is 
automatically isolated from the system operation configuration, and the operation 
continues with the other normal XDI in degradation mode without a reboot.  The 
failed XDI thus isolated can be hot-swapped.  To incorporate a new XDI into the 
system, the entire server must be restarted.

When the operation is performed without System Mirror:

An XDI does not form a redundant configuration.  If the XDI fails, all partitions stop.  
The failed XDI can be maintained (swapped) while all partitions are stopped.  A new 
XDI after swapping is automatically incorporated into the system when any partition 
is started.

(11) MMBs

The MMB is usually duplicated and hot swapping is enabled.

If the active MMB fails, it automatically switches to the other normal MMB.  The 
failed MMB can be hot-swapped.

(12) KVM

Redundant configuration is not adopted, but hot swapping is available.

(13) DVD drive

Redundant configuration is not adopted, but hot swapping is available.  However, the 
DVD drive cannot solely be swapped since it is the built-in drive of the KVM.

(14) CPCBs

Redundant configuration is not adopted, and hot swapping is not available.

Two Clock Generators (CLGs) are mounted on a CPCB.  When a CLG fails, an MMB 
controls operation to switch from the failed CLG to the normal CLG.  When a CLG 
fails, the entire server is restarted automatically.

Содержание PRIMEQUEST 440

























































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды