manualshive.com logo in svg

Fujitsu PRIMEQUEST 440, Руководство по проектированию систем

Поделиться
Скачать
Fujitsu PRIMEQUEST 440 Скачать руководство пользователя страница 36

1-4

C122-B001-02EN

CHAPTER 1 PRIMEQUEST Overview

 

The Management Board (MMB) is a feature that manages the PRIMEQUEST 
hardware as a whole.  The MMB can be connected to the MMB console, the Field 
Support Tool (FST), and the Internet via a LAN.  The MMB console is a console used 
to configure or display the hardware resource settings.  The FST is a console used by 
maintenance personnel to maintain the PRIMEQUEST hardware.  It is connected to 
the Remote Customer Support System (REMCS) via the Internet or a P-to-P 
connection to remotely monitor the unit status.

The Gigabit Switch Board (GSWB) is a Gigabit-Ethernet-compatible switching hub.  
GSWBs are used to construct business LANs.

The clock and PCI_Box control board (CPCB) is a component with two functions: 
one is to generate system clock signals and send them to PRIMEQUEST hardware, 
and the other is to control a PCI_Box and uninterruptible power supply (UPS).

The KVM interface unit (KVM) is a feature used to connect devices including the 
keyboard, display, and mouse.

1.1.1.1 Hardware components

The main PRIMEQUEST components include the SB, IO_Unit, crossbar, MMB, and 
GSWB.  

Figure 1.3

 shows the connection configuration of these main components.  In 

Figure 1.3

, a rectangle represents one SB, IO_Unit, MMB, or GSWB board.

System boards (SBs) are boards on which CPUs, memory modules, PRIMEQUEST-
dedicated chipsets, and other components are mounted.  The PRIMEQUEST 480 can 
contain up to eight SBs and the PRIMEQUEST 440 can contain up to four SBs within 
the cabinet.

One SB can accommodate one to four CPUs.  Therefore, the PRIMEQUEST 480 can 
contain up to 32 CPUs and the PRIMEQUEST 440 can contain up to 16 CPUs in 
total.  One SB can contain up to 64 GB of memory.  This means that the 
PRIMEQUEST 480 can contain up to 512 GB of memory and the PRIMEQUEST 
440 can contain up to 256 GB of memory.

IO_Units are boards on which hard disk drives (HDDs), PCI card slots, and other 
components are mounted.  The PRIMEQUEST 480 can contain up to eight IO_Units 
and the PRIMEQUEST 440 can contain up to four IO_Units within the cabinet.  One 
IO_Unit can contain four HDDs.  This means that the PRIMEQUEST 480 can contain 
up to 32 HDDs (4.70 TB) and the PRIMEQUEST 440 can contain up to 16 HDDs 
(2.35 TB).  To accommodate PCI cards, the PRIMEQUEST 480 has 32 PCI card slots 
and the PRIMEQUEST 440 has 16 PCI card slots.  By using PCI_BOXes (optional), 
you can add additional PCI card slots.

Содержание PRIMEQUEST 440

























































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды