manualshive.com logo in svg

Fujitsu PRIMEQUEST 440, Руководство по проектированию систем

Поделиться
Скачать
Fujitsu PRIMEQUEST 440 Скачать руководство пользователя страница 105

C122-B001-02EN

3-7

 

3.4 Linked Software

3.4.3

PRIMECLUSTER GLS

PRIMECLUSTER GLS is software that uses multiple network interface cards (NICs) 
to ensure redundancy of the network transmission paths connected to its system in 
order to provide high reliability in all communication.

For details on the redundant configuration, see 

CHAPTER 6, "Redundant 

Configuration."

For details on PRIMECLUSTER GLS, see the PRIMECLUSTER GLS manuals.

3.4.4

Server System Manager

Server System Manager integrates management of multiple PRIMEQUEST servers.

For details on Server System Manager, see the Server System Manager manuals.

3.4.5

Systemwalker

Systemwalker is integrated operation management software that manages systems, 
networks, resources, etc., to support Internet-based businesses.

For details on Systemwalker, see the Systemwalker manuals.

3.4.6

Backup and restoration software

The following backup and restoration software can be used in linkage with the 
PRIMEQUEST-series machines:

- VERITAS NetBackup

TM

- NetVault
- Softek ACM
- NetWorker
- Softek TSM

For details on backup and restoration, see 

CHAPTER 10, "Backup and Restoration."

Remarks:

Access the Fujitsu Web site to confirm the latest information on linkage 
software.

Содержание PRIMEQUEST 440

























































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды