manualshive.com logo in svg

Fujitsu PRIMEQUEST 440, Руководство по проектированию систем

Поделиться
Скачать
Fujitsu PRIMEQUEST 440 Скачать руководство пользователя страница 51

C122-B001-02EN

1-19

 

1.2 PRIMEQUEST Features

1.2.1.7 Hardware redundancy and hot maintenance function

The main components in the PRIMEQUEST-series machines are made redundant to 
improve business continuity.

Also, PRIMEQUEST supports the hot maintenance function under certain conditions, 
so that maintenance components can be disconnected and installed during system 
operation.  However, replacing components is a task handled by Fujitsu maintenance 
personnel.

Hardware redundant configuration

The redundant configurations of the main hardware components are described below:

z

Internal chipset

The important control part of the PRIMEQUEST-
dedicated internal chipset is duplicated.

z

Board

For most board types, two or more boards can be 
mounted for a redundant configuration.  Therefore, if 
one board fails, operation can continue with another 
board.

z

Power supply unit

Redundant power supply units are provided, so if one 
power supply unit fails, operation can continue with 
another power supply unit.  A dual power feed has been 
prepared as an option.

z

Cooling fan unit

Redundant cooling fan units are also provided, so if one 
fan unit becomes faulty, operation can continue with 
another fan unit cooling the system.

z

Other main components The MMB, different types of LANs, the crossbar, and 

other main components are duplicated (standard), and if 
one system fails, operation can continue with the other 
system.

 

Note: The optional GSWB can also be duplicated,

 

depending on the operating method.

Содержание PRIMEQUEST 440

























































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды