FujiFilm X-Pro1, Руководство по обслуживанию

Страница: 53 / 132

Confidential: FUJIFILM Service Center Use Only
X-Pro1 Service Manual
1-47
1-17.
Procedure5
(1) I take out BASE GRIP F (
①
), and possess CASE F of the camera body and close
a screw (
②
) to CASE F.
*1: I tighten a screw while approaching to the thickness direction of the camera body and lose it.
Clamping order :
①
→
②
→
③
→
④
Screw total torque : 0.10±0.02N
・
m
(2) I take out TAPE GRIP F (
③
) and stick it on BASE GRIP F after detachment paper stripping.
Pasting standard: Direction of right and left: Chart below standard A part insinuation
Top and bottom direction: Chart below standard B part insinuation
*1: Perform pasting up from the position becoming the standard of right and left direction and
the top and bottom direction.
*2: Press the whole enough so that tape adheres.
1
2
3
4
Standard B
Standard A
Revised:21.Feb.2012