FujiFilm X-Pro1, Руководство по обслуживанию

Страница: 73 / 132

Confidential: FUJIFILM Service Center Use Only
X-Pro1 Service Manual
3-13
3-8-2. Launching the Adjustment Software other then [I]:MAIN PWB Initialize
[Adjustment environment and precautions]
• When "OK" and "NG" window is displayed and adjusts the same camera again, switch camera power off once, and please
switch camera power on with a jig mode again.
<Step 1>
Click : Start
↓
Programs
↓
FUJIFILM REPAIR SERVICE
↓
X-Pro1_W Adjustment Software
↓
X-Pro1_W
The adjustments are the same whichever option is
selected.
<Step 2>
If adjustment stops at the window shown on the right, press
the [Enter] key to proceed.
<Step 3>
[Repair site ID input]
The first time the adjustment software is launched, a
window appears where you select the repair site ID
recorded in the camera during End Setting.
In this window, select the appropriate repair site.
E.g.: USA -> Press "A" on the keyboard.
* Once this has been set, this window no longer appears on
the PC.
* To reset the repair site ID, exit the adjustment software
and then delete C:\X-Pro1_W\base.txt.
Repair site ID input
0: SAPPORO A: USA F: BRITAIN Z: OTHERS
2: KURIHARA B: CANADA G: GERMANY
3: TOKYO C: HAWAII H: FRANCE
5: OSAKA I: SPAIN
D: TAIWAN J: ITALY
8: FUKUOKA T: CHINA K: NETHERLANDS
Q: SINGAPORE L: BELGIUM
M: SWEDEN
N: SWITZERLAND
O: NORWAY
P: FINLAND