FujiFilm X-Pro1, Руководство по обслуживанию

Страница: 54 / 132

Confidential: FUJIFILM Service Center Use Only
X-Pro1 Service Manual
1-48
(3) I stick GRIP F (
④
) on takeoff BASE GRIP F/TAPE GRIP F.
Pasting standard: Direction of right and left: Chart below standard A part insinuation
Top and bottom direction: Chart below standard B part insinuation
*1: GRIP F to BASE GRIP F runs; impossibility (all laps department)
*2: Press GRIP F from the top so that a gap does not occur in GRIP F and BASE GRIP F.
(4) I take out LEVER FINDER (
⑤
), and possess CASE TOP and close a screw (
⑥
) to CASE TOP.
Screw total torque : 0.14±0.02N
・
m
(5) I take out DECO PLATE LEVER (
⑦
) and stick it on LEVER FINDER after detachment stripping.
Standard B
Standard A
Revised:21.Feb.2012
Revised:13.April.2012