FujiFilm X-Pro1, Руководство по обслуживанию

Страница: 102 / 132

Confidential: FUJIFILM Service Center Use Only
X-Pro1 Service Manual
4-2
4-3. Inspection and Factory Settings
Sequence
Item Mode
Preparations for adjustment
(measurement points, subject, other)
Method of adjustment
(VRs, waveforms, required values)
Measuring
equipment
and jigs
1 External visual
check
(1) Observe the camera. (1) Check for damage to the outer
casing (Inventory repairs only).
Check for problems with the clicking
or sliding movement of switches.
Check for dust or fogging in the
LCD.
2 Attachment of a
lens (1) Lens mount cover is removed.
(2) 35mm Lens is attached.
(2) Garbage dose not enter to the inside
of
a lens mount.
3 Power switch
check
P mode (1) Set the power supply voltage.
(2) Connect the power supply jig to the
battery terminal.
(3) Insert a card.
(4) Select the mode dial setting.
(5) Turn the camera on.
(6) If a message appears asking for the
language and date to be set, press
the specification button on the right.
(7) Check the LCD screen display
status.
(8) Check for blemishes in the CMOS
live
image. (1) 7.80V ± 0.10V
(3) SD card for recording checking.
(4) Mode: IRIS AUTO/SS AUTO.
(6) <DISP/BACK>
(7) Check that the live image and text is
displayed.
(8) Monitor a very bright subject and
check that the live image does not
dim or darken.
ZJ01936-100
ZPU0512-100
4 Shock noise check
in Auto mode P mode (1) Apply a shock to the camera using
the shock jig. (1) Check for problems on the LCD
monitor.
Check that the camera recovers
from synchronicity disruption.
(Note) Do not apply shocks directly
to the lens or card cover.
5 Leveling instrument
check
P mode (1) Turn on level indication.
(2) The camera is rotated by 90
degrees.
(3) Turn off level indication. (1) Push the <DISP/BACK> button and
choose CUSTOM(C) setting.
(2) The indication of the level follow it.
(3) Push the <DISP/BACK> button and
choose STANDERD setting.
6 Image rotate check P mode (1) The camera is rotated by 90
degrees.
(2) Press the shutter button to take a
picture.
(2) Rotate image have to be easy to
understand.
7 Resolution check
Focusing check
P mode (1) Use a macro resolution chart as the
subject.
(2) Set the camera to Macro mode.
(3) Set the camera up so that the chart
fills the screen from corner to corner.
(4) Press the shutter button to take a
picture.
(2) The Macro icon ( ) appears on the
LCD monitor.
(4) The indicator lamp lights green ->
Intermittently lights orange or green
(recording) -> Turns off. ZJ00525-100