FujiFilm X-Pro1, Руководство по обслуживанию

Страница: 77 / 132

Confidential: FUJIFILM Service Center Use Only
X-Pro1 Service Manual
3-17
<Step 2>
(1) Connect Power cable (or jig).
(2) Connect the camera to the PC using the “USB cable”.
(3) Switch camera power ON while pressing the shutter button and up key.
In the adjustment item select screen, select [I]:MAIN PWB Initialize.
<Step 3>
[Checking MAIN PWB Initialize]
Implementation details
(1) Reset the flash ROM and format the internal memory.
Press the [Y] key to begin "MAIN PWB Initialize".
Press the [C] key to cancel the procedure.
<Step 4>
[Ending MAIN PWB Initialize]
(1) Turn the camera off.
(2) Remove the Power cable (or jig) from the camera.
(3) Remove USB cable from the camera.
(4) Press the [Enter] key.
Press the [Enter] key to return to the Adjustment Software
Start-up Screen.
MAIN PWB Initialize
MAIN PWB Initialize is completed.
(1) Turn off power switch.
(2) Remove the Power cable (or jig) from the camera.
(3) Remove USB cable from the camera.
(4) Press the [Enter] key.
[Enter] -> Return to Start-Up Screen.
MAIN PWB Initialize
Always carry out this step if the MAIN PWB ASSY has been
replaced.
[Implementation details]
1. Reset the flash Rom and
Format the internal memory.
[Y] - - -> Proceed to [MAIN PWB Initialize]
[C] - - -> Cancel.