FujiFilm X-Pro1, Руководство по обслуживанию

Страница: 78 / 132

Confidential: FUJIFILM Service Center Use Only
X-Pro1 Service Manual
3-18
3-10. [F9]:Mount Data Write
[Adjustment environment and precautions]
• Do not vibrate the camera during adjustment.
[Required items]
Camera fixing jig If there are no problems with the adjustment environment, a tripod or X-Y
stage can be used.
Mount data for X-Pro1 ZJ01979-100
NP-W126 Battery jig ZJ01936-100
[Method of acquiring MOUNT data]
MOUNT data is required when the CONST ASSY FRONT or
UNIT MOUNT or Y-10241MAIN PWB ASSY is replaced.
1. When you exchange UNIT MOUNT
--> It is attached to UNIT MOUNT.
2. When you exchange CONST ASSY FRONT or
Y-10241MAIN PWB ASSY
--> Creating a MOUNT data floppy disk when the CONST
ASSY FRONT or Y-10241MAIN PWB ASSY has been
replaced.
* The following example assumes the use of the serial
No. shown at right.
<Step 1>
Read the serial number of UNIT MOUNT.
The numbers shown at right are as follows.
7000051(7 digits)
The name of the MOUNT data file containing this number is
“
7000051.txt
”
.
Cautions:
1. The MOUNT data file extension is
“
txt
”
. Depending
upon Windows settings, this extension may not be
displayed. In this case, change the settings to ensure that
it is displayed.
2. In addition to numbers, letters are also used in the
MOUNT serial No. The data file name is instructed in the
same manner in this case.
3. Ensure that the MOUNT serial No. is read correctly. If the
file name is read incorrectly MOUNT data for another
camera will be loaded when this file is used.
<Sample image>
MOUNT No.
7000051
Revised:13.April.2012