FujiFilm X-Pro1, Руководство по обслуживанию

Страница: 105 / 132

Confidential: FUJIFILM Service Center Use Only
X-Pro1 Service Manual
4-5
* Please downloaded from Web server (https://denhin.fujifilm.co.jp/csg_en/index.htm or http://fujifilm-di.intranets.com/).
21 Variable power
lens check
P mode (1) Look into the OVF and check the
OVF display.
(2) EVF lever is pulled a long time and
check the variable power lens comes
out.
(3) Again EVF lever is pulled a long time
and the variable power lens
is returned.
(4) Turn the camera off. (1) In an EVF display, EVF lever is plulled.
22 Checking standby
current
Power off (1) Chek the power supply voltage.
(2) Check the standby current when the
power is turned OFF.
(3) Disconnect the SD card from the
camera. (1) 7.80 V
±
0.10 V
(2) 0.5 mA or less
ZJ01936-100
23 Removal of a
lens (1) 35mm Lens is removed.
(2) Lens mount cover is attached. (1) Garbage dose not enter to the inside
of
a lens mount.
There is no crease,bend,dent in a
mount pin.
24 Shipping
inspection
(Inventory repairs
only)
(1) Mode dial.
(2) AF changeover switch.
(3) SETUP frame no.
(4) Variable power lens.
(5) Battery and cards not inserted.
(6) Battery cover.
(7) DC coupler cable cover.
(8) Terminal cover.
(9) Lens mount cover.
(10) Synchronization terminal cover.
(11) Power off. (1) Aperture value AUTO/Shutter Speed
AUTO/
Exposure 0EV
(2) AF-S
(3) New: The default SETUP frame No.
setting is
“ Continuous ” , but to clear
the number of frames in the frame
number memory to zero, you should
always change the setting to
“ New ”
before turning the camera off.
(4) OFF
(5) Normal
(6) Closed
(7) Closed
(8) Closed
(9) Set
(10) Set
(11) The power supply is stopped after
the camera's shutdown sequence
ends.
* Setting and clearing date
(1) Connect the USB/AV CABLE from
the PC to the camera (ensure that
the PC is switched ON).
(2) Switch power ON (POWER_ON)
while pressing the shutter button and
button.
(3) Switch power OFF (POWER_OFF).
(4) Check that the date has been
cleared.