FujiFilm X-Pro1, Руководство по обслуживанию

Страница: 106 / 132

Confidential: FUJIFILM Service Center Use Only
X-Pro1 Service Manual
4-6
4-4. Resolution Check
<Settings for Resolution Check >
(1) It cuts it like figure 2, and please stick FxX100 Line
Chart (ZJ01848-100) on a board of 1,204.1mm X
796.9mm.
(2) Referring to right figure 1, Prepare for a camera and
resolution chart.
(3) Lights up the resolution chart with a source of light.
(4) Brightness of the resolution chart
Center :500
～
850LX
Periphery: 0
～
+400LX (For the center)
<STEP 1>
[Resolution Check initialization]
(1)
35mm Lens is attached.
(2) Set the Battery and SD card to the camera.
(3) Turn the camera on.
(4) Carry out the reset of Camera from MENU
(5) Set a camera as follows
1. Shooting mode : A (Aperture Value)
2.ISO : 200
3.WB : Fluorescent light -3
4.Aperture value : F4
5.Film simulation : Standard
6.Self-timer : 2sec
(6) Fix a camera to a tripod, and point a camera to the
resolution chart.
(7) Set resolution chart at the position of 1200mm (+-3mm)
from the lens tip of the camera.
(8) Match a chart angle of view with LCD like figure 2.
(9) Photograph it.
* If a self-timer begins to work, please do not touch the
camera.
Figure.2
Figure.1
Source of light.
Resolution
Chart
ZJ01848-100
From the surface of the
mount
Illumination of the resolution chart
Center :500～850LX
Periphery : 0 ～ +400LX (For the