Fuji Electric RHC-D 690V Series, Руководство пользователя

Страница: 144 / 175

Valid Functions for
Parallel System Slaves
(Items not listed are invalid)
Terminal Signal Remarks
Digital output
Overload warning [PRE-OL]
Driving [DRV]
Regenerating [REG]
Synchronizing power supply
frequency
[SY-HZ]
Alarm details [AL1 - 3]
Outputs with alarm information from master
added.
Option DO [OPT-DO]
Analog input All invalid -
Analog output
Input power [PWR] Outputs input power calculated by unit itself.
Input current effective value [I-AC]
Outputs voltage and current detected by unit
itself.
Input voltage effective value [V-AC]
Intermediate DC voltage [V-DC]
Outputs intermediate voltage detected by unit
itself.
Power supply frequency [FREQ] Outputs frequency detected by unit itself.
+10, -10 V test [P10, N10]
(3) Keypad functions
The keypad functions can be used without restrictions for either the master or slave.
(4) Function codes (F - U)
The master unit can be used without restrictions,
however, slave units have functional restrictions.
Code "1" must be set to the same value for both
the master and slave.
Slave function codes
Code Class Code Class Code Class Code Class Code Class Code Class Code Class
F00 2 E01 2 E10 2 E19 2 H01 2 H10 2 H19 0
F01 0 E02 2 E11 2 E20 2 H02 2 H11 2 H20 0
F02 0 E03 2 E12 2 E21 2 H03 2 H12 3
F03 1 E04 2 E13 2 E22 2 H04 2 H13 3
F04 2 E05 2 E14 2 E23 2 H05 2 H14 2
F05 2 E06 2 E15 1 E24 2 H06 2 H15 0
F06 2 E07 2 E16 2 E25 2 H07 2 H16 0
F07 2 E08 2 E17 2 E26 2 H08 2 H17 0
F08 0 E09 2 E18 2 E27 2 H09 2 H18 0
(5) Function codes (S: Command data, M: Monitor)
S codes (command data)
The master unit can use all codes, however, only S01 "Operation" is valid for slave units.
However, section "9.7.7 I/O Function" restrictions apply.
M codes (monitor data)
Both master and slave units can be used without restrictions.
0: Setting invalid
1: Setting valid (code for which same value as master must be
set)
2: Setting valid (code for which no need to set same value as
master)
3: Setting valid (code for which setting unique to parallel system
required)
9-51