Fuji Electric RHC-D 690V Series, Руководство пользователя

Страница: 115 / 175

9.3.6 Function code
• Wrong function code data may cause danger. Check the data again after finishing data entry and writing.
Accidents may result.
No.
Name of parameter
Setting
range
Description of setting
Name
Indication at
keypad
H02
Operation selection upon
error occurrence
(Er4 upon minor failure)
MODE ON
ER
0
Immediate forcible stop upon occurrence of minor
failure
(Er4 trip: Output shutoff)
1
After minor failure, operation continues for the
timer interval (upon a communication error, the
operation command sent in the immediately
previous session is held). After the timer interval,
forcible stop (Er4 trip: output shutoff)
If communication is restored in the timer interval,
the converter follows the command sent via
communication. However, forcible stop after timer
interval.
2
After occurrence of minor failure, operation
continues for the timer interval (upon minor
failure, the operation command sent in the
immediately previous session is held). If the minor
failure is not removed after the timer interval,
forcible stop.
If communication is restored in the timer interval,
normal operation continues according to the
command sent via communication.
3
Even if minor failure occurs, an alarm (Er4) is not
developed. In the minor failure state, the operation
command having been sent in the immediately
previous session is held. Upon restoration of
communication, normal operation continues
according to the command sent via
communication.
H03 Timer interval TIMER LINK
0.00
to
20.00s
Operation time timer setting for occurrence of
minor failure.
Valid if H02 = "1" or "2."
• The factory shipment settings are: H02 = 3 and H03 = 2.00
• For accessible function codes, refer to the function code list.
9-22