Fuji Electric RHC-D 690V Series, Руководство пользователя

Страница: 63 / 175

Error handling of data copy function
1) Prohibition of change during operation
If data is saved during converter operation or if the
converter is started during saving operation, an
error occurs and the screen shows as shown on the
right.
Stop the converter and press RESET, then repeat
saving.
2) Memory error
If data is saved though data has not been saved in
the data loading mode to the data memory of the
keypad (empty data), or if the converter type
(capacity, model, voltage class, etc.) specified in
the data having been loaded with data loading
function is different from the type of the converter
to which data is being saved, an error occurs and
the screen shows as shown on the right.
3) Verify error
If difference from converter data is found during
data verification in the data kept in the memory of
the keypad, the function code number is displayed
and an error is displayed as shown on the right,
while the data check function is temporarily
stopped.
To continue the data check function and search for
other differences, press FUNC/DATA; to terminate
the data check function to do another process, press
RESET.
4) Data protection
If data is protected using F00, the screen shows as
shown on the right. To continue saving, change the
F00 setting to enable data change.
<COPY; KP-CNV>
400-69 400-69
WRITE
CNV RUNNING
Saving during operation
<COPY; KP-CNV>
400-69 450-69
WRITE
MEMORY ERROR
EEPROM checksum error
No EEPROM data
Press F/D to continue, or RESET then
PRG to interrupt.
<COPY; KP-CNV>
400-69
＝
400-69
VERIFY
ERR: F02
3% 2/64
Verify error
<COPY; KP-CNV>
400-69 400-69
WRITE
DATA PRTCTD
1% 1/64
Data protected with F00
Press RESET then PRG to interrupt.
Press RESET then PRG to interrupt.
Press F/D to continue, or RESET then
PRG to interrupt.
5-19