Fuji Electric RHC-D 690V Series, Руководство пользователя

Страница: 158 / 175

Table 11.2-3 Extension Terminal Functions (E codes)
Function
code
Communications
address
Function code name Data setting range Format
485 No Link No.
E01 101h 4Eh Terminal [X1] function 0 to 4
0: External alarm
THR
1: Cancel current limiter LMT-CCL
2: 73 answerback 73ANS
3: Switch current limit I-LIM
4: Option DI OPT-DI
47
E02 102h 4Fh Terminal [Y1] function 0 to 14
0: Converter running
RUN
1: Converter ready to run RDY
2: Power supply current being limited IL
3: Lifetime alarm LIFE
4: Heat sink overheat early warning PRE-OH
5: Overload early warning PRE-OL
6: Power running DRV
7: Regenerating REG
8: Current limiting early warning CUR
9: Restarting after momentary power failure
U-RES
10: In synchronization with source frequency
SY-HZ
11: Alarm content 1 AL1
12: Alarm content 2 AL2
13: Alarm content 3 AL4
14: Option DO OPT-DO
48
E03 103h 50h Terminal [Y2] function Refer to Terminal [Y1] function. 48
E04 104h 51h Terminal [Y3] function Refer to Terminal [Y1] function. 48
E05 105h 52h Terminal [Y5] function Refer to Terminal [Y1] function. 48
E06 106h 53h
Terminal [Y11] function
(DIO option)
Refer to Terminal [Y1] function. 48
E07 107h 54h Terminal [Y12] function
(DIO option) Refer to Terminal [Y1] function. 48
E08 108h 55h
Terminal [Y13] function
(DIO option)
Refer to Terminal [Y1] function. 48
E09 109h 56h
Terminal [Y14] function
(DIO option)
Refer to Terminal [Y1] function. 48
E10 10Ah 57h
Terminal [Y15] function
(DIO option)
Refer to Terminal [Y1] function. 48
E11 10Bh 58h
Terminal [Y16] function
(DIO option)
Refer to Terminal [Y1] function. 48
E12 10Ch 59h
Terminal [Y17] function
(DIO option)
Refer to Terminal [Y1] function. 48
E13 10Dh 5Ah
Terminal [Y18] function
(DIO option)
Refer to Terminal [Y1] function. 48
E14 10Eh 5Bh I/O function
(Normal open/close) 0000 to 007F
Defines the normal state of RUN, X1, Y1 to Y3,
Y5, and 30RY.
0: Normal open
1: Normal close 35
E15 10Fh 5Ch RHC overload early
warning 50 to 105% 0
11-3