10 - 2
INP-TN4PHAV-E
Action to take
Refer to "Note 6: If the ink is not
sprayed" on page 5-8.
When the working environment is
15
°
C or less, perform print-out of
"record" or "test pattern" after a
period of several minutes has elapsed
since the recording head was
mounted. (The recording head has a
built-in heater.)
Push the head on properly.
(Refer to Step 6 of Section 5.2)
State
Ink does not come out
even though there is no
'Ink out' display or the ink
colours are blurred.
Characters are deformed.
The record colours are
wrong.
Ink does not flow.
Trend record or characters
turn to double-line (round
trip difference appears) or
characters are disordered.
Points to check
Carefully note the points described on page 5-7
in relation to the recording head (i.e., the notes
on storage and avoiding imposition of
vibration or impact). If ink does not flow
properly, take the action described on the right.
If this has no effect, the recording head must
be replaced.
Is the head inserted into the carrier sufficiently?
1) Wire the carriage drive shaft with dry, clean cloth.
2) When this procedure 1) is not effective, follow Section 9.1 "Print/record
adjustment".
