7 - 25
INP-TN4PHAV-E
Note: Relations between operation start times and print-out times
When setup of daily report start time and end is changed, the print list immediately after the
change is not compensated.
After the time setup was changed, turn off the daily report or integration (buffer clear) is
possible. Then turn on again and wait for one day (until the end time on the next day).
To print out a daily report for 24 hours, set the start time and end time.
Automatic print-out
(data of 2nd day)
Present time
1st day's
start time
1st day's
end time
2nd day's
start time
2nd day's
end time
Automatic print-out
(data of 1st day)
During this period, correct
data cannot be printed even if
it is attempted to make list
Print-out.
During this period, the data for
the 1st day is printed out if
daily report is printed in list
print-out mode.
