5 - 8
INP-TN4PHAV-E
Note 5: Shipping of recording head
• Do not ship the unit recording head after the aluminum pack was opened up.
If it is necessary to ship the unit recording head under avoidable circumstances, be sure to close the
cap, and ship it as contained in a boxboard in the state where vibration and impact are eased using
cushioning materials.
• Always close the cap if you are transporting a head while it is still installed in the recorder main unit.
Note 6: If the ink is not sprayed.
(1) Hold the recording head with turning the nozzle surface down-
ward and push the side strong till spilling two drops.
(2) Absorb the standing ink on the nozzle surface with the cloth at-
tached.
(3) Hold the cloth to the nozzle surface again to find all colors flowed
onto cloth.
* When working environment is 15
°
C or less, perform print-out
of "record" or "test pattern" after a period or several minutes
has elapsed since the recording head was mounted. (The re-
cording head has a built-in heater.)
Reference: Ink consumption
This varies depending on the conditions of use but with a chart speed of 25mm/h and recording of
constant input, the amount of consumption is as follows.
About 1 year .............................. in the case of 1, 2, 3 continuous records
About 6 months ......................... in the case of 6 continuous records
About 3 months ......................... in the case of 12 continuous records
An ink dry-up warning-detection function produces a warning display in the display section and a
warning print-out the recording paper.
(See Section 11.12 for an example of print-out.)
