Frenic 5000VG7S Series, Инструкция по эксплуатации

Страница: 56 / 97

5-12
Function codes “S” and “M” are codes to access the inverter
through links (RS485, T-Link, SX communication, field bus, etc).
You cannot use them with the KEYPAD panel.
Though you can access the codes “F” to “U” codes through these
links, these links are specifically designed to access the code “S”
for operation and control and the “M” for data monitoring.
S: Serial Communication Functions
Communication
address
Fcode
485
number Link number
Function name Data setting range
S01 701h 1( 1 h) Frequency / speed reference (Setting 1) -24000 to 24000 r/min
: (data)*Nmax/20000
S02 702h 2( 2 h) Torque reference 0.01% / 1d
S03 703h 3( 3 h) Torque current reference 0.01% / 1d
S04 704h 4( 4 h) Magnetic-flux reference 0.01% / 1d
S05 705h 5( 5 h) Orientation position reference 0000 to FFFF
S06 706h 6( 6 h) Operation method 1 0000 to FFFF
S07 707h 7( 7 h) Universal Do 0000 to FFFF
S08 708h 8( 8 h) Acceleration time 0.0 to 3600.0 s
S09 709h 9( 9 h) Deceleration time 0.0 to 3600.0 s
S10 70Ah 10( A h) Torque limiter level 1 0.01% / 1d
S11 70Bh 11( B h) Torque limiter level 2 0.01% / 1d
S12 70Ch 12( C h) Operation method 2 0000 to FFFF
M: Monitoring Functions
Communication
address
Fcode
485
number
Link number
Function name Data setting range
M01 801h 15( F h) Speed setting 4 (ASR input) -24000 to 24000 r/min
: (data)*Nmax/20000
M02 802h 16( 10 h) Torque reference 0.01% / 1d
M03 803h 17( 11 h) Toque current reference 0.01% / 1d
M04 804h 18( 12 h) Magnetic-flux reference 0.01% / 1d
M05 805h 19( 13 h) Output frequency reference 0.1Hz / 1d
M06 806h 20( 14 h) Detected speed value -24000 to 24000 r/min
: (data)*Nmax/20000
M07 807h 21( 15 h) Calculated torque value 0.01% / 1d
M08 808h 22( 16 h) Calculated torque current value 0.01% / 1d
M09 809h 23( 17 h) Output frequency 0.1Hz / 1d
M10 80Ah 24( 18 h) Motor output 0.1kW / 1d
M11 80Bh 25( 19 h) Output current rms value 0.1A / 1d
M12 80Ch 26( 1A h) Output voltage rms value 0.1V / 1d
M13 80Dh 27( 1B h) Operation method (final command) 0000 to FFFF
M14 80Eh 28( 1C h) Operation status 0000 to FFFF
M15 80Fh 29( 1D h) Output terminals Y1 - Y18 0000 to FFFF
M16 810h 30( 1E h) Latest alarm data 0 to 48
M17 811h 31( 1F h) Last alarm data 0 to 48
M18 812h 32( 20 h) Second last alarm data 0 to 48
M19 813h 33( 21 h) Third last alarm data 0 to 48
M20 814h 34( 22 h) Accumulated operation time 0 to 65535 h
M21 815h 35( 23 h) DC link circuit voltage 1V / 1d
M22 816h 36( 24 h) Motor temperature 1 °C / 1d
M23 817h 37( 25 h) Type code 0000 to FFFF
M24 818h 38( 26 h) Capacity code 0 to 29
M25 819h 39( 27 h) Inverter ROM (main control) version 0000 to FFFF
M26 81Ah 40( 28 h) Communication error code 0 to 65535
M27 81Bh 41( 29 h) Speed setting on alarm -24000 to 24000 r/min
: (data)*Nmax/20000
M28 81Ch 42( 2A h) Torque reterence on alarm 0.01% / 1d
M29 81Dh 43( 2B h) Torque current reference on alarm 0.01% / 1d
M30 81Eh 44( 2C h) Magnetic-flux reference on alarm 0.01% / 1d
M31 81Fh 45( 2D h) Output frequency reference on alarm 0.1Hz / 1d
M32 820h 46( 2E h) Detected speed on alarm -24000 to 24000 r/min
: (data)*Nmax/20000
M33 821h 47( 2F h) Calculated torque on alarm 0.01% / 1d
M34 822h 48( 30 h) Calculated torque current on alarm 0.01% / 1d
M35 823h 49( 31 h) Output frequency on alarm 0.1Hz / 1d
M36 824h 50( 32 h) Motor output on alarm 0.1kW / 1d
M37 825h 51( 33 h) Output current rms value on alarm 0.1A / 1d
M38 826h 52( 34 h) Output voltage rms value on alarm 0.1V / 1d
M39 827h 53( 35 h) Operation method on alarm 0000 to FFFF
M40 828h 54( 36 h) Operation status on alarm 0000 to FFFF
M41 829h 55( 37 h) Output terminal on alarm 0000 to FFFF
M42 82Ah 56( 38 h) Accumulated operation time on alarm 0 to 65535 h
M43 82Bh 57( 39 h) DC link circuit voltage on alarm 0.1V / 1d
M44 82Ch 58( 3A h) Inverter intemal temperature on alarm 1 °C / 1d
M45 82Dh 59( 3B h) Heat sink temperature on alarm 1 °C / 1d
M46 82Eh 60( 3C h) Main circuit capacitor capacity 0 to 100 %
M47 82Fh 61( 3D h) PC board capacitor life on alarm 0 to 65535 h
Communication
address
Fcode
485
number
Link number
Function name Data setting range
M48 830h 62( 3E h) Cooling fan life 0 to 65535 h
M49 831h 63( 3F h) Speed setting 1
(before multistep speed command)
-24000 to 24000 r/min
: (data)*Nmax/20000
M50 832h 64( 40 h) Speed setting 2
(before calculation of accel/decel.)
-24000 to 24000 r/min
: (data)*Nmax/20000
M51 833h 65( 41 h) Speed setting 3 (after speed limit) -24000 to 24000 r/min
: (data)*Nmax/20000
M52 834h 66( 42 h) Control output 1 0000 to FFFF
M53 835h 67( 43 h) Control output 2 0000 to FFFF
M54 836h 68( 44 h) Control output 3 0000 to FFFF
M55 837h 69( 45 h) Option monitor 1 0000 to FFFF
M56 838h 70( 46 h) Option monitor 2 0000 to FFFF
M57 839h 71( 47 h) Option monitor 3 0 to 65535
M58 83Ah 72( 48 h) Option monitor 4 0 to 65535
M59 83Bh 73( 49 h) Option monitor 5 -32768 to 32767
M60 83Ch 74( 4A h) Option monitor 6 -32768 to 32767
You can change the setting of a function indicated by during operation.
You should stop operation to change the setting of other functions.
Underline indicates a factory setting.
Items without underline have different factory settings according to capacity.