Frenic 5000VG7S Series, Инструкция по эксплуатации

Страница: 34 / 97

2-16
2) FRN132VG7S-4 to FRN160VG7S-4
(a) Pull the wiring out along the left side panel as shown in Figure 2-3-15.
(b) Tie leads with bands (Insulock, for example) and secure with cable tie holders on the beams on the way
outward. The bands should be 3.8 mm or less in width and 1.5 mm or less in thickness as they are to be
passed through square holes (3.8 × 1.5).
3) FRN75VG7S-2 to FRN90VG7S-2
FRN200VG7S-4 to FRN220VG7S-4
(a) Pull the wiring out along the left side panel as shown in Figure 2-3-17.
(b) Tie leads with bands (Insulock, for example) and secure with cable tie holders on the beams on the way
outward. The bands should be 3.8 mm or less in width and 1.5 mm or less in thickness as they are to
be passed through holes (3.8 × 1.5).
4) For FRN280VG7S-4 to FRN400VG7S-4
(a) Draw out along the left side panel of your inverter as in the Figure 2-3-17.
(b) Use an insulating clip above the main circuit terminal board L1/R to fix the wiring.
Figure 2-3-13
Routing Inverter (18.5 kW or
Higher) Control Circuit Leads
Figure 2-3-14
Securing Inverter (18.5 kW or
Higher) Control Circuit Leads
Figure 2-3-15
Routing Inverter Control Circuit Leads
Figure 2-3-16
Securing Inverter Control Circuit Leads
Figure 2-3-17
Routing Inverter Control Circuit Leads
Figure 2-3-18
Securing Inverter Control Circuit Leads