%
Depending on the configuration of the
device, after connecting the mobile phone via
Bluetooth
®
, the prompt may appear in the
media display asking if Android Auto should
be started. The query must in that case be
answered with
Yes
.
%
It is possible at any time to switch between
connection via Bluetooth
®
or Android Auto
(wireless) in the device list.
Accepting/rejecting the data protection pro‐
visions
A message with the data protection provisions
appears.
#
Select
Accept & Start
.
Returning to the main menu
#
Press the
ò
button.
%
If Android Auto was not displayed in the fore‐
ground before disconnecting, the application
starts in the background when reconnected.
You can call up Android Auto in the main
menu.
Calling up the Android Auto sound settings
Multimedia system:
4
©
5
Smartphone
5
Android Auto
5
Z
#
Select sound settings.
Ending Android Auto
#
Disconnect the connecting cable between the
mobile phone and multimedia system.
Freightliner Sprinter recommends disconnect‐
ing the connecting cable only when the vehi‐
cle is stationary.
Transferred vehicle data with Android Auto
and Apple CarPlay
®
Overview of transferred vehicle data
When using Android Auto or Apple CarPlay
®
, cer‐
tain vehicle data is transferred to the mobile
phone. This enables you to get the best out of
selected mobile phone services. Vehicle data is
not directly accessible.
The following system information is transmitted:
R
software release of the multimedia system
R
system ID (anonymized)
The transfer of this data is used to optimize com‐
munication between the vehicle and the mobile
phone.
To do this, and to assign several vehicles to the
mobile phone, a vehicle ID is randomly gener‐
ated.
This has no connection to the vehicle identifica‐
tion number (VIN) and is deleted when the multi‐
media system is reset (
/
page 190).
The following vehicle status data is transmitted:
R
transmission position engaged
R
distinction between parked, standstill, rolling
and driving
R
day/night mode of the instrument cluster
The transfer of this data is used to alter how con‐
tent is displayed to correspond to the driving sit‐
uation.
The following position data is transmitted:
R
coordinates
R
speed
R
compass direction
R
acceleration direction
This data is only transferred while the navigation
system is active, in order to improve it (e.g. so it
can continue functioning when in a tunnel).
Media
Information about media mode
Information about supported formats and
data storage media
&
WARNING Risk of distraction when han‐
dling data storage media
If you handle a data storage medium while
driving, your attention is diverted from the
traffic conditions. This could also cause you
to lose control of the vehicle.
#
Only handle a data storage medium
when the vehicle is stationary.
%
Depending on the equipment installed play‐
back of video formats may not be possible.
198 Multimedia system
Содержание Sprinter 2020
Страница 7: ......
Страница 18: ...ASpare wheel example 265 16 At a glance Emergencies and breakdowns...