freightliner Sprinter 2020, Руководство по эксплуатации

Страница: 106 / 344

Colors of the indicator lamp:
R
Blue: stationary ventilation has been
switched on.
R
Red: the stationary heater has been switched
on.
R
Yellow: the departure time has been pre-
selected.
The stationary heater or ventilation switches off
after a maximum of 50 minutes.
Switching heater booster mode on and off
#
Switch on the ignition.
#
To switch on: press the & button.
#
To switch off: press the & button.
Heater booster mode will be switched on at
an outside temperature of less than 32 °F
(0 °C) when necessary.
% Heater booster mode is available only for
vehicles with hot-water auxiliary heaters.
Adjusting the hot-water auxiliary heater with
the on-board computer
Requirements:
R
The fuel tank is filled above the reserve fuel
level.
R
The ignition is switched on.
On-board computer:
4
Settings
5
Heating
Setting the switch-on time
#
Select Settings .
#
Select the desired departure time.
Activating the departure time
#
Activate the departure time by ticking the
box.
%
Ensure that A, B and C each correspond to a
programmed departure time.
%
The programmed time remains set only until
the next time the engine is started.
Selecting programmed time
#
Set the required programmed time A, B or C.
%
The required programmed time A, B or C will
appear only if the box to activate the depar‐
ture time is ticked.
#
Select the required programmed time by
swiping left or right, e.g. A, B or C.
104 Climate control