freightliner Sprinter 2020, Руководство по эксплуатации

Страница: 234 / 344

#
First loosen and remove the negative terminal
clamp on the battery so that the clamp is no
longer in contact with the terminal.
#
Remove the positive terminal clamp cover.
#
Loosen the positive terminal clamp and fold it
up to the side, together with the prefuse box.
Removing/installing the starter battery
Vehicles with rear wheel drive: removing the
starter battery
#
Disconnect the starter battery (
/
page 231).
#
Remove breather hose 1 with the connector
bracket from the connection on the degassing
cover.
#
Pull out and remove screws 2 of bracket 3
upwards.
#
Slide the starter battery from its anchorage in
the direction of travel.
#
Fold the bars of the starter battery upwards
and remove the starter battery from the bat‐
tery box.
Vehicles with rear wheel drive: installing the
starter battery
#
When reconnecting the starter battery,
observe the safety measures and protection
notes (
/
page 228).
#
Insert the starter battery into the battery box.
#
Fold down the bars of the starter battery.
#
Slide the starter battery into its anchorage in
the opposite direction to the direction of
travel.
#
Insert bracket 3 .
#
Tighten screws 2 on bracket 3 which holds
the battery in place.
#
Attach breather hose 1 with the connector
bracket to the connection of the degassing
cover.
#
Reconnect the starter battery (
/
page 231).
Freightliner Sprinter recommends that you have
the starter battery replaced at a qualified special‐
ist workshop, e.g. a Freightliner Sprinter service
center.
232 Breakdown assistance