freightliner Sprinter 2020, Руководство по эксплуатации

Страница: 122 / 344

#
Press the brake pedal and the DIRECT
SELECT lever upwards or downwards to the
first point of resistance.
Transmission position display i is shown in
the multifunction display.
Releasing the brake pedal will allow you to move
the vehicle freely, e.g. to push it or tow it.
If the automatic transmission should also
stay in neutral i i when the ignition is
switched off, carry out the following:
#
Start the vehicle.
#
Depress the brake pedal and shift to neutral
i .
#
Release the brake pedal.
#
Switch off the ignition.
% If you then leave the vehicle and the Smart‐
Key is still in the vehicle, the automatic trans‐
mission will stay in neutral i from then on.
Engaging park position P
#
Press button 1 .
Transmission position display j is shown in
the multifunction display.
Park position j is engaged automatically when
one of the following conditions is met:
R
You switch off the engine in transmission
position h or k .
R
You open the driver's door when the vehicle is
stationary or when driving at a very low speed
and in transmission position h or k .
Engaging drive position D
#
Depress the brake pedal and push the
DIRECT SELECT lever downwards past the
first point of resistance.
Transmission position display h is shown in
the multifunction display.
The automatic transmission shifts through the
individual gears automatically when it is in trans‐
mission position h . This is determined by the
following factors:
R
Position of the accelerator pedal
R
Driving speed
120 Driving and parking