#
To disconnect the sliding door from the
electric motor: turn release catch
2
180°
clockwise.
The "MAN" position is set.
#
To unlock: pull locking pin
3
upwards man‐
ually or use the central locking button to
unlock the sliding door (
/
page 46).
#
Press button
1
.
#
Open or close the sliding door with the out‐
side/inside door handle.
#
To connect the sliding door to the electric
motor: turn release catch
2
180° counter-
clockwise.
The "AUTO" position is set.
#
Adjust the sliding door (
/
page 52).
#
If it is not possible to rectify the malfunction,
visit a qualified specialist workshop.
Resetting the electric sliding door
Sliding door button on the center console
Sliding door button on the center console
1
Opens and closes the sliding door on the
right side of the vehicle
Sliding door button on the door sill (B-pillar)
You must reset the sliding door if there has been
a malfunction or a voltage supply interruption.
#
If the sliding door is open: press button
1
on
the center console or sliding door button
3
on the door sill (B-pillar) and hold until the
door is closed.
or
#
Close the sliding door with the door handle
(
/
page 51).
#
Then briefly press button
1
on the center
console or sliding door button
3
on the door
sill (B-pillar) once, or pull the door handle
(
/
page 51) to completely open the sliding
door.
The sliding door is operational.
Rear-end doors
Opening and closing the rear-end doors from
outside
&
WARNING Risk of accident and injury
when opening the rear-end door in poor
traffic conditions
When you open a rear-end door, the following
is possible:
R
Other people or road users may be endan‐
gered
R
You may be caught by oncoming traffic
This is particularly the case if you open the
rear-end door more than 90°.
#
Only open the rear-end doors when traf‐
fic conditions permit.
#
Always make sure that the rear-end
doors are properly locked.
52 Opening and closing
Содержание Sprinter 2020
Страница 7: ......
Страница 18: ...ASpare wheel example 265 16 At a glance Emergencies and breakdowns...
