Freescale Semiconductor MPC5553, Справочное руководство

Страница: 883 / 1208

MPC5553/MPC5554 Microcontroller Reference Manual, Rev. 5
20-10 Freescale Semiconductor
18 DIS_TXF Disable transmit FIFO. Provides a mechanism to disable the TX FIFO. When the TX FIFO is
disabled, the transmit part of the DSPI operates as a simplified double-buffered SPI. See
Section 20.4.3.3, “FIFO Disable Operation for details.”
0 TX FIFO is enabled
1 TX FIFO is disabled
19 DIS_RXF Disable receive FIFO. Provides a mechanism to disable the RX FIFO. When the RX FIFO is
disabled, the receive part of the DSPI operates as a simplified double-buffered SPI. See
Section 20.4.3.3, “FIFO Disable Operation for details.”
0 RX FIFO is enabled
1 RX FIFO is disabled
20 CLR_TXF Clear TX FIFO. Flushes the TX FIFO. Writing a 1 to CLR_TXF clears the TX FIFO counter.
The CLR_TXF bit is always read as zero.
0 Do not clear the TX FIFO counter
1 Clear the TX FIFO counter
21 CLR_RXF Clear RX FIFO. Flushes the RX FIFO. Writing a 1 to CLR_RXF clears the RX counter. The
CLR_RXF bit is always read as zero.
0 Do not clear the RX FIFO counter
1 Clear the RX FIFO counter
22–23 SMPL_PT
[0:1]
Sample point. Allows the host software to select when the DSPI master samples SIN in
modified transfer format.
Figure 20-38 shows where the master can sample the SIN pin. The
table below lists the various delayed sample points.
24–30 — Reserved.
31 HALT Halt. Provides a mechanism for software to start and stop DSPI transfers. See Section 20.4.2,
“Start and Stop of DSPI Transfers ,” for details on the operation of this bit.
0 Start transfers
1 Stop transfers
Table 20-3. DSPIx_MCR Field Descriptions (Continued)
Bits Name Description
SMPL_PT Number of system clock cycles between
odd-numbered edge of SCK and sampling of SIN.
00 0
01 1
10 2
11 Reserved