Foundry NetIron MLX Series Installation and Basic Configuration Guide
B-16
© 2008 Foundry Networks, Inc.
December 2008
WARNING:
The NetIron MLX-32 fan assembly is heavy and will be off-balance as you remove it.
Use both hands on the handle.
ACHTUNG:
Die NetIron MLX-32-Ventilatoreinheit ist schwer und kommt aus dem Gleichgewicht,
wenn sie entfernt wird. Den Griff mit beiden Händen anfassen.
AVERTISSEMENT:
Le module de ventilation du NetIron MLX-32 est lourd et peut déséquilibrer lors de la
dépose. Tenir la poignée à l'aide des deux mains.
ADVERTENCIA:
La unidad del ventilador del sistema NetIron MLX-32 es pesada y quedará
desequilibrada al desmontarla. Agarre el asa con las dos manos.
WARNING:
Make sure to choose the appropriate circuit device depending on the number of AC
power supplies installed in the chassis.
ACHTUNG:
Je nach Anzahl der Wechselstrom-Netzteile im Gehäuse muss das passende
Stromgerät ausgewählt werden.
AVERTISSEMENT:
Assurez-vous de choisir le dispositif de circuit approprié selon le nombre de blocs
d’alimentation C.A. installés dans le châssis.
ADVERTENCIA:
Asegúrese de que elige el dispositivo de circuitos apropiado dependiendo del número
de suministros de corriente alterna instalados en el chasis.
WARNING:
Be careful not to accidently insert your fingers into the fan tray while removing it from
the chassis. The fan may still be spinning at a high speed.
ACHTUNG:
Die Finger dürfen nicht versehentlich in das Ventilatorblech gesteckt werden, wenn
dieses vom Gehäuse abgenommen wird. Der Ventilator kann sich unter Umständen
noch mit hoher Geschwindigkeit drehen.
AVERTISSEMENT:
Faites attention de ne pas accidentellement insérer vos doigts dans le boîtier du
ventilateur lorsque vous l’enlevez du châssis. Il est possible que le ventilateur tourne
encore à grande vitesse.
ADVERTENCIA:
Procure no insertar los dedos accidentalmente en la bandeja del ventilador cuando
esté desmontando el chasis. El ventilador podría estar girando a gran velocidad.
WARNING:
To prevent damage to the chassis and components, never attempt to lift the chassis
using the fan or power supply handles. These handles were not designed to support
the weight of the chassis.
ACHTUNG
:
Alle Geräte mit Wechselstromquellen sind nur zur Installation in Sperrbereichen
bestimmt. Ein Sperrbereich ist ein Ort, zu dem nur Wartungspersonal mit einem
Spezialwerkzeug, Schloss und Schlüssel oder einer anderen Schutzvorrichtung
Zugang hat.
AVERTISSEMENT:
Pour éviter d’endommager le châssis et les composants, ne jamais tenter de soulever
le châssis par les poignées du ventilateur ou de l’alimentation. Ces poignées n’ont pas
été conçues pour supporter le poids du châssis.