Flowserve FlowAct 1502 Скачать руководство пользователя страница 54

Страница: 54 / 76

FlowAct Diaphragm Linear Actuator FCD VLENIMFACTA4 10/16

Item #

Part

5.30

Adapter

107

5.32

Hex Bolt

118

5.31

Locking Plate

201

5.9

Yoke

213

5.7

Stroke Scale

214

5.20

Socket Head Screw (2x)

216

5.6

Stroke Indicator

240

5.5

Socket Head Screw (4x)

249

5.3

Actuator Coupling

256

5.11

Actuator Locknut

333

5.12

Plain Washer

334

5.19

Plain Washer (2x)

344

5.4

Lock Nut

345

5.1

Valve Coupling

420

5.8

Hex Bolt

201

213

333

420

214

Actuator

334

256

344

240

216

345

118

107

249

Table 34: Coupling parts

Figure 31: Coupling parts

Actuator with yoke

Spring-to-close or -open

Disassembly instruction of the yoke

NOTICE

Limit disassembly only to necessary compo-
nents.

1. Fix the actuator on the assembly table, if this is not

already happened, see also page 14 - 15.

2. Remove the socket head screws (214), plain washers

(334) and the stroke indicator (216).

3. Unlock the lock nut (344) counter-clockwise.

4. Loosen the actuator coupling (249) and lock nut (344)

clockwise.

5. We recommend you not to remove the actuator from

the yoke. If this is indispensable mark the position,

loosen the actuator locknut (256) clockwise and lift off

the actuator.

NOTICE

Use a rounded chisel and a hammer.

6. Store all coupling and yoke-parts safely, lose no parts.

7. For disassemble the attachments see pages 50 - 51

and for actuator subassembly see pages 42 - 49.

Reassembly instruction of the yoke

8. Lubricate the threads of the actuator and stroke cou-

pling-parts with an appropriate lubricant.

9. If necessary mount actuator onto the yoke (201) put

in line with the mark and tighten the actuator locknut

(256) counter-clockwise. The vent plug shall be at a

right angle to the yoke legs (see figure 31).

NOTICE

Use a rounded chisel and a hammer.

10. Screw in the lock nut (344) and the actuator coupling

(249) - screw-in depth once thread diameter - counter-

clockwise and fix it. Aligning the coupling parallel to

the yoke.

11. Mount the stroke indicator (216), plain washers (334)

and the socket head screws (214) clockwise.

12. Further reassembling steps are only possible with the

valve (see page 39).

Содержание FlowAct 1502













































































Результаты поиска

Содержание FlowAct 1502

Отзывы:

Бренды по названию

Популярные бренды

Flowserve FlowAct 1502, Инструкция пользователя

Результаты поиска

Содержание FlowAct 1502

Отзывы:

Бренды по названию

Популярные бренды