manualshive.com logo in svg

Flowserve FlowAct 1502, Инструкция пользователя

Поделиться
Скачать
Flowserve FlowAct 1502 Скачать руководство пользователя страница 27

FlowAct   Diaphragm Linear Actuator      FCD VLENIMFACTA4 10/16

27

flowserve.com

Item #

Part

WW

EU

256

5.11

Lock Nut

372

6.30

Hex Nut

394

6.31

Carrier

Table 18: Handwheel parts

   Actuator

   372

   256

   394

   HandWheel

Figure 15: Handwheel parts

Actuator with Handwheel - light

Spring-to-open

Disassembly instruction of the handwheel subas-

sembly

NOTICE

Limit disassembly only to necessary compo-
nents.

1.  Fix the actuator on the assembly table, if this is not 

already happened.

2.  Turn the handwheel counter-clockwise as long as it 

reached the upper end-position.

3.  Loosen the hexagon nut (372) clockwise.

4.  Loosen the carrier (394) counter-clockwise.

5.  Loosen the lock nut (256) counter-clockwise.

NOTICE

Use a rounded chisel and a hammer.

6.  Lift off and store the handwheel safely, lose no parts.

7.  For disassemble the actuator subassembly see pages 

24 - 25.

Reassembly instruction of the handwheel subas-

sembly

8.  Lubricate the threads of the actuator with an appropri-

ate lubricant.

9.  Mount the handwheel onto the actuator and tighten the 

lock nut (256) clockwise.

NOTICE

Use a rounded chisel and a hammer.

10. Mount the hexagon nut (372) onto the actuator stem.

11. Mount the carrier (394) clockwise and lock the hexa-

gon nut (372).

12. Turn the handwheel clockwise as long as it reached the 

upper end-position.

13. Connect the actuator with the air supply, perform three 

full strokes and check the free movement of the carrier.

NOTICE

The carrier must be able to move freely 
without hitting in the end positions.

14. Log the maintenance interval and the work performed.

15. The actuator subassembly is ready to be mounted on 

the valve and the accessories attached.

Содержание FlowAct 1502













































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды