manualshive.com logo in svg

Flowserve FlowAct 1502, Инструкция пользователя

Поделиться
Скачать
Flowserve FlowAct 1502 Скачать руководство пользователя страница 13

FlowAct   Diaphragm Linear Actuator      FCD VLENIMFACTA4 10/16

13

flowserve.com

Defect

No.

Possible Causes

Remedy

Jerky stem movement

2.1

•  Damaged stem

•  Contact customer service department or contract 

partner

2.2

•  Actuator not powerful enough

•  Compare actuator specifications on the serial 

plate with operation specifications of the facility. If 

incompatible, contact customer service department 

or contract partner

Stem travel less than full stroke

(0 to 100 %)

3.1

•  Air supply pressure too low

•  Provide air at the pressure stated on the serial plate 

(European production only).

3.2

•  Pneumatic actuators:

Improper handwheel position

•  Move handwheel to limit position , otherwise 

contact factory for information.

3.3

•  Improperly adjusted or defective 

positioner

•  Readjust positioner to positioner manufacturer‘s 

specification

3.4

•  Foreign particles in valve seat or 

damaged trim

•  Contact customer service department or contract 

partner

No limit switch signal

4.1

•  Power supply to limit switch 

interrupted

•  Check power supply

(connections, circuit breakers, voltage)

4.2

•  Limit switch out of adjustment

•  Readjust limit switch operating distance; see limit 

switch data sheet

Unstable positioner

5.1

•  Defective positioner

•  See user instruction of the positioner manufacturer

Table 8: Trouble-shooting

15 Disassembly and Reassembly

The FlowAct linear actuator is allowed to be disassembled and reassembled only by qualified staff 

- personnel who are familiar with disassembling, reassembling, installation and commissioning 

of this product, and possess the relevant qualifications in their field of activity.

14 Operation of the handwheel

WARNING

Due to risk of crushing hazard, 
do not work with the handwheel 

during regular operation. Actuation is only permitted with 
separated air supply !

1.  The handwheel is always in the neutral position in the 

delivery condition.

2.  The handwheel  are designed to act against the fail 

safety position of the actuator. That means in the 

case of an pneumatic actuator design with restoring 

springs.

NOTICE

When adjusting, then the handwheel 
press against the spring force - with-

out the actuator the handwheel has no function.

3.  All handwheel designs are immediately ready for use, 

except the lateral handwheel for the 1502 and 3002 

actuator. In the event of fail safe position - spring-to-
open (retracted) - before using, the handwheel must 

turned counterclockwise up to contact the drive pin the 

coupling and subsequently locked.

4.  Check the progress of the stroke adjustment on the 

stroke indicator scale.

5.  If normal operation is to be resumed, the handwheel 

must be turned always to the neutral position.

Содержание FlowAct 1502













































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды