Configuration
CB-640x Installation and User Guide Revision 100
February 2021
64
This document does not contain any export-controlled information.
5.14.2
SNMP
SNMP (Simple Network Management Protocol) enables the network management system (NMS) to
remotely monitor and manage the camera. You can enable the following SNMP versions and configure
their settings: SNMP v1, SNMP v2c, and SNMP v3.
If you are not sure how to configure the SNMP settings, contact your network or system administrator.
To apply changes to SNMP settings, click
Save
.
Figure 80: SNMP Settings
SNMP v1
To enable SNMP v1, move the slider to the right. By default, SNMP v1 is disabled.
SNMP v2c
To enable SNMP v2c, move the slider to the right. By default, SNMP v1 is disabled.
Read Community String
: Specify the community name that has read-only access to all supported SNMP
objects. The default value is
public
.
Write Community String
: Specify the community name that has read/write access to all supported SNMP
objects (except read-only objects). The default value is
private
.
