Configuration
CB-640x Installation and User Guide Revision 100
February 2021
57
This document does not contain any export-controlled information.
To modify an existing rule:
1. In the list of rules, click the icon next to the rule. The rule trigger appears.
Figure 68: Rule List - Rule Trigger
2. Click the trigger. The rule configuration Trigger screen appears.
3. Modify the rule according to the procedure for
4. Click
Done
.
5.8 Audio Page
On the Audio page, you can configure the camera’s audio input and output settings.
Figure 69: Audio Page
Audio is enabled by default. To disable it, move the slider to the left. The setting applies to audio input
and output.
Line In
Level
: Select
High
,
Mid
(default), or
Low
.
Encoding
: Select
AAC
(default),
G.711 a-law
, or
G.711 µ-law
.
Line Out
Level
: Select
High
,
Mid
(default), or
Low
.
To apply any changes to the settings, click
Save
.
5.9 I/O Devices Page
On the I/O Devices page, you can configure the number of input and output pins, and enable or disable
individual pins.
