Configuration
CB-640x Installation and User Guide Revision 100
February 2021
62
This document does not contain any export-controlled information.
•
IP Filtering
5.14.1
Certificates
Before you can enable SSL/TLS/HTTPS, you need to have a valid certificate installed in the camera.
You can generate a self-signed certificate, or you can upload a certificate issued by a Certificate
Authority (CA).
Figure 77: Cyber Page - Certificate Settings
To generate a self-signed certificate:
1. Under Method, do one of the following:
•
To generate a self-signed certificate, click
Self-Signed
.
•
To generate a self-signed certificate and then be able to download it for future use, click
Request
.
2. In the Certificate area, specify:
•
Country Code
: Specify the two-letter combination code for the country in which the certificate will
be used. For example, if you are generating a certificate to be used in the United States, enter
US.
•
Province Name
: Specify the state or province name.
•
City Name
: Specify the city name.
•
Common Name
: Specify the hostname or IP address of the camera (used to identify the
camera).
•
Organization Name
: Specify the name of the organization to which the Common Name belongs
(for example, a company name).
•
Organization Unit Name
: Specify the name of the unit within the organization (for example,
department or division).
•
Email Address
: Specify the email address of the person responsible for maintaining the
certificate.
