Configuration
CB-640x Installation and User Guide Revision 100
February 2021
44
This document does not contain any export-controlled information.
Configuration
Users assigned the admin or expert role can click
System Settings
on the
configure:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
In addition, users assigned the admin or expert role can access the Firmware & Info page to upgrade the
camera's firmware, reset the camera to its factory defaults, reboot the camera, and configure other
parameters.
5.1 Network Page
On the Network page, you can configure the camera’s networking settings.
Figure 46: System Settings Network Page - IP Mode Settings
Select the networking mode:
•
DHCP
: The camera is connected to a network with a DHCP server that assigns the camera its
IPv4
Address
,
IPv4 Subnet Mask
, and
IPv4 Default Gateway
.
•
Static
: Manually specify the camera’s:
o
IPv4 Address:
Identifies the camera on the network.