Configuration
CB-640x Installation and User Guide Revision 100
February 2021
46
This document does not contain any export-controlled information.
Figure 48: UPnP Settings
Enable UPnP
(Universal Plug and Play): When enabled, any unit on the LAN can detect the camera and
you can configure the
Mode
:
•
IP and Device Name
(default): When the camera connects to the LAN, other units on the LAN detect
the camera by its IP address, model, and serial number (configurable on the
).
•
Device Name
: When the camera connects to the LAN, other units on the LAN detect the camera by
its model and serial number.
•
User Input
: When selected, you can configure a
Friendly Name
for the camera. When the camera
connects to the LAN, other units on the LAN detect the camera by its specified
Friendly Name
.
By default, UPnP is enabled. To disable it, move the slider to the left.
Figure 49: DDNS Settings - DynDNS Selected
Enable DDNS
(Dynamic DNS): When enabled, DNS records are automatically updated. Before enabling,
you must first register with a DDNS service provider. When enabled, you can configure the
Type
(provider):
•
DynDNS
(default):
•
No-IP
•
Two-DNS
•
FreeDNS
Specify the
Host Name
,
User Name
, and
Password
for the DDNS account.
If you are using FreeDNS, you need to specify a
Hash
value, which is an encrypted string representing
your user name and password. To determine the
Hash
By default, DDNS is disabled. To enable it, move the slider to the right.
