Operation
CB-640x Installation and User Guide Revision 100
February 2021
38
This document does not contain any export-controlled information.
To configure the alarm output pin state:
Figure
38
: Alarm Output Pin - Pulse Settings
1. Click
Output
.
2. Click
Alarm
.
3. Select whether the display state of the alarm output pin is
On
or
Off
.
4. Select the state in which the alarm output pin is not alarmed:
Open
(default) or
Closed
.
5. Select the method of alarm output pin activation:
•
Pulse
: Activates the alarm output pin for a configurable duration (
On Time
, between
0.1-200
seconds), interval (
Off Time
, between
0.1-200
seconds), and
Count
(between
1-Infinite
Frame
).
•
Normal
: Activates the alarm output pin for a single configurable
Duration
(
5
,
10
,
15
,
30
seconds) or an
Infinite
duration.
Figure
39
: Alarm Output Pin - Normal Settings
If you made any changes on the I/O page, click
Save
to apply the changes. Click
Reset
to discard
changes and revert to the last saved settings.
4.6 Illumination Page
The Illumination page enables you to activate and configure the camera’s infrared (IR) LED illumination.