Installation
CB-640x Installation and User Guide Revision 100
February 2021
20
This document does not contain any export-controlled information.
Figure 19: Alignment Triangles
Then, while carefully holding and fully supporting the camera, to make sure the screws are not bearing
the camera's weight when tightening them, use the Torx wrench to tighten the three T20 screws
attached to the adapter plate.
Figure 20: Attach Camera to Back Box
Figure 21: Mounting Complete
3.8.2 Adjusting the Sun Shield
The CB-640x cameras are designed to operate in rugged environments. The sun shield is coated to
prevent damage from sunlight or rain.
Figure 22: Adjusting the Sun Shield