Installation
CB-640x Installation and User Guide Revision 100
February 2021
10
This document does not contain any export-controlled information.
Installation
This chapter describes how to mount, connect, and initially configure the unit:
•
•
•
Outdoor Mounting Recommendations
•
•
•
•
Mounting the Back Box and Routing the Cables
•
Mounting and Aiming the Camera
•
•
Attaching the Camera to a Supported VMS
3.1 Supplied Components
The unit package contains the following items:
QTY
Description
1
CB-640x IR bullet camera body attached to sun shield, bracket,
and adapter plate
1
T10 security Torx wrench
1
Back box
1
Two-pin terminal block
1
Mounting template
1
Part bag containing:
1
RJ45 insertion tool
1
Rubber seal for single cable
1
Rubber seal for multiple cables
1
Part bag containing:
1
Hex wrench
6
Plastic screw anchors
6
TP4x31mm tapping screw
6
M4x14 screw
1
CB-640x Quick Install Guide
3.2 Pre-Installation Checklist
Before installing the unit, make sure that:
•
Instructions in the
and
•
All related equipment is powered off during the installation.