FLIR Quasar CB-6404 Скачать руководство пользователя страница 27

Страница: 27 / 87

Installation

CB-640x Installation and User Guide Revision 100

February 2021

This document does not contain any export-controlled information.

3.7 Mounting the Back Box and Routing the Cables

If required, install additional mounting hardware for the camera according to the instructions for the

hardware.
To maintain structural integrity, before drilling into the mounting surface, make sure it is at least 50mm

(2”) thick.

To mount the back box:

1. Using the mounting template, drill six holes on the wall or mounting surface: Diameter

⌀

3/8”

(9.5mm), depth 1/1/2” (40mm). To ensure proper installation, make sure the drilled holes are of

correct size.

2. Hammer the six screw anchors into the drilled holes.
3. Cables can enter the back box from the rear or from the side. If the cables are going to enter from

the rear, use the mounting template to drill a bottom conduit hole for the cables.

4. Route the power and network cabling into the back box.

•

If you are connecting the camera using a single Ethernet cable with an RJ45 plug attached,

attach the RJ45 insertion tool included with the camera to the RJ45 plug. Then, route the tool,

plug, and cable through the single cable rubber seal included with the camera.

Figure 17: RJ45 Insertion Tool

Figure 18: Single Cable Rubber Seal

•

If you are connecting the camera in any other way, route the cables through the multiple cable

rubber seal included with the camera.

Securely fasten the rubber seal to either the bottom or the side conduit hole. In addition, FLIR

recommends applying 3M waterproofing tape on the cables that pass through either conduit hole.

5. Mount the back box onto the wall or surface. Using the Philips head screwdriver, fasten the six TP4

tapping screws into the six screw anchors.

Connect the Camera

Inside the back box, connect the camera's system cable to the other cables according to the information

Hardware Description

3.8 Mounting and Aiming the Camera

3.8.1 Attaching the Camera to the Back Box

With the camera attached to the adapter plate, align the triangle on the adapter plate with the triangle on

the back box.

Содержание Quasar CB-6404
























































































Результаты поиска

Содержание Quasar CB-6404

Отзывы:

Похожие инструкции для Quasar CB-6404

Бренды по названию

Популярные бренды

FLIR Quasar CB-6404, Инструкция по установке и эксплуатации

Результаты поиска

Содержание Quasar CB-6404

Отзывы:

Похожие инструкции для Quasar CB-6404

Бренды по названию

Популярные бренды