Installation
CB-640x Installation and User Guide Revision 100
February 2021
12
This document does not contain any export-controlled information.
Component
Description
4 Direct mounting bracket
To install the camera directly on a wall or ceiling, without using the
attached adapter plate and supplied back box. For more information,
Detaching the Camera from the Adapter Plate
5 Sun shield
Minimizes the effects of rain and sunlight on image quality.
6 Camera body
With sun shield attached
7 Access cover
Provides access to the camera’s
3.4.1 System Cable
The camera’s built-in system cable includes an RJ-45 Ethernet jack, and five (2) two-wire leads that
provide audio input and output, alarm input and output, and external power supply connections. The
cable includes an LED that flashes green to indicate power on and network activity.
Figure 8: System Cable
Connector
1 Black
RJ-45
2 Black
12 VDC/24 VAC -
Red
12 VDC/24 VAC+
3
Yellow
AUDIO IN+
Orange
AUDIO IN-
Purple
AUDIO OUT+
Green
AUDIO OUT-
Red
ALARM IN Signal
Black
ALARM IN GND
Brown
ALARM OUT Signal Blue
ALARM OUT COM
3.4.2 Internal Interfaces
To access the camera’s default and reset buttons, along with the camera’s microSD card slot, remove
the access cover by loosening two screws.