Firegear KALEA BAY Скачать руководство пользователя

Страница: 41 / 44

Kalea Bay LED Outdoor Fireplace

REV. B Page 41

The end-user must provide a bill of sale, canceled check, or payment record to verify the purchase

date and to establish the warranty period. This Limited Warranty shall be valid and limited to the

original purchaser only.

WARNING:

Any modification to the product will void the warranty.

This Limited Warranty shall be limited to the repair and/or replacement of parts that have been proven

to be defective under normal use and service. All warranty claims must be made by the

OEM/Distributor/Dealer account on behalf of the end-user. You may contact Technical Support at

800-966-8126.

Our Technical Service Department must confirm all approved defects. If a defect is confirmed and we

approve the claim, we will replace such parts without charge. This warranty gives you specific legal

rights, and you may also have other rights, which vary from state to state.

The manufacturer may request defective products returned with an RMA (Return Merchandise

Authorization) issued by Firegear Outdoors for specific products, which is considered to be the

nature of the defect and or warranty claim. Product to be returned should; be packed so as not to

incur damages during transportation. Firegear is not responsible for damages on returned items. RMA

is valid for thirty (30) days from the date issued. The RMA must be clearly marked on the outside of

the package.

Please check with your local building code department or governing agency for proper approvals

before purchasing. Firegear Outdoors is not responsible for any violation of local codes.

Travel, diagnostic cost, service labor to repair the defect on warranty parts to and from the factory will

be the responsibility of the owner. We will not be responsible for labor charges and/or damage

incurred in installation, repair, and replacement. Firegear is not responsible for Issues related to gas

or electrical installation.

The Limited Warranty is voided if not assembled, installed, and operated as intended. This Limited

Warranty does not cover any defects due to accident, abuse, misuse, alteration, misapplication,

vandalism, improper installation or improper maintenance or service, removal from the original

location, or re-installation into another location, or failure to perform normal and routine maintenance.

Damage due to severe weather conditions such as hail, hurricanes, earthquakes, tornadoes,

discoloration due to overheating, exposure to chemicals (including chlorine and salt), either directly or

in the atmosphere, or very high humidity, is not covered by this Limited Warranty. Costal, humid and/

or salt environments are subject to manufacturer review. All out-of-box claims must be made within 30

days of purchase and must be made prior to installation. Any product installed damaged will be

considered damaged during installation and not covered under warranty.

There are no other express warranties except as set forth herein. For consumer applications, any

applicable implied warranties of merchantability and fitness are limited induration to the period of

coverage of this Limited Warranty. Some states do not allow limitation on how long an implied

warranty lasts, so this limitation may not apply to you.

For Commercial Applications, the liability of Firegear Outdoors is limited to the express terms of this

warranty. We expressly disclaim any and all implied warranties, including any warranties of fitness for

a particular purpose or merchantability.

Содержание KALEA BAY













































Результаты поиска

Содержание KALEA BAY

Отзывы:

Похожие инструкции для KALEA BAY

Бренды по названию

Популярные бренды

Firegear KALEA BAY, Инструкция по установке и эксплуатации

Результаты поиска

Содержание KALEA BAY

Отзывы:

Похожие инструкции для KALEA BAY

Бренды по названию

Популярные бренды