Kalea Bay LED Outdoor Fireplace
REV. B Page 13
SEE-THROUGH FIREPLACE
DIMENSIONS, FRAMING
AND CLEARANCES SECTION
NOTE: Preparation for the LED lighting and the inlet gas line
must be planned before the fireplace is installed. See page 6,
Fig 1 for inlet gasline and page 16 for LED lighting.
It is important to understand that when installing this outdoor appliance the
installation must follow ANSI standards as described below.
AN OUTDOOR SPACE IS DEFINED AS FOLLOWS PER ANSI Z21.97
:
Outdoor spaces - An appliance is considered to be outdoors if installed with shelter no
more inclusive than:
• a) With walls on all sides, but with no over-head cover;
• b) Within a partial enclosure which includes an overhead cover and no more than
two side walls. These side walls may be parallel, as in a breezeway, or at right an-
gles to each other; or
• c) Within a partial enclosure which includes an overhead cover and three sidewalls,
as long as 30% or more of the horizontal periphery of the enclosure is permanently
open.
