background image

Kalea Bay LED Outdoor Fireplace

REV. B        Page 2

DANGER

CARBON MONOXIDE HAZARD

This appliance can produce carbon monoxide which has no odor.

Using it in an enclosed area can kill you.

Never use this appliance in an enclosed space such as a camper, 

tent, car or home.

WARNING

Do not store or use gasoline or other 

flammable vapors and liquids in the vicinity of 

this or other appliance.

An LP cylinder not connected for use shall not 

be stored in the vicinity of this or any other 

appliance.

WARNING

Do not leave unattended during use.

Do not use for cooking.

Follow all gas leak procedures in this manual 

prior to operation.

WARNING

Improper installation, adjustment, alteration, 

service or maintenance can cause injury or 

property damage, personal injury of loss of life 

WARNING

If the information in this manual is not followed 

exactly, a fire or explosion may result causing 

property damage, personal injury, or 

loss of 

life

.

FOR YOUR SAFETY

Do not store or use gasoline or other flammable 

vapors and liquids in the vicinity of this or other 

appliances.

If you smell gas:

1.  Shut off gas to the appliance

2.  Extinguish any open flame.

3.  If odor continues, leave the area               

immediately.

4.  After leaving the area, call your gas supplier 

or fire department.

DANGER
FIRE OR EXPLOSION 

HAZARD

HOT GLASS 

WILL 

CAUSE BURNS

DO NOT TOUCH 

GLASS UNTIL COOLED

NEVER 

ALLOW CHILDREN 

TO TOUCH GLASS

A barrier designed to reduce the risk of burns 

from the hot viewing glass is provided with this 

appliance and shall be installed for the 

protection of children and other at-risk 

individuals.

DANGER

CALIFORNIA PROPOSITION 65

 

WARNING

This product is designed to operate with one of the 

following fuel sources:  Liquid Propane or Natural Gas. 

The fuel used to operate this product, and the products of 

combustion of such fuel, can expose you to chemicals 

including Benzene which is known to the State of 

California to cause cancer, birth defects and other 

reproductive harm and Carbon Monoxide which is known 

to the State of California to cause birth defects or other 

reproductive harm. 

(For more information go to: www.p65Warnings.ca.gov.)

Содержание KALEA BAY













































Отзывы: